Does the Nexus 6001 support native FC? I'm having issues changing the port type;
show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 1.5.0
loader: version N/A
kickstart: version 7.0(5)N1(1)
system: version 7.0(5)N1(1)
Power Sequencer Firmware:
Module 1: version v4.0
Module 2: version v4.0
Fabric Power Sequencer Firmware: Module 1: version v4.0
Microcontroller Firmware: version v1.2.0.5
QSFP Microcontroller Firmware:
Module 2: v1.3.0.0
SFP Microcontroller Firmware:
Module 1: v1.1.0.0
BIOS compile time: 12/29/2012
kickstart image file is: bootflash:///n6000-uk9-kickstart.7.0.5.N1.1.bin
kickstart compile time: 10/29/2014 22:00:00 [10/30/2014 11:46:56]
system image file is: bootflash:///n6000-uk9.7.0.5.N1.1.bin
system compile time: 10/29/2014 22:00:00 [10/30/2014 11:47:58]
Hardware
cisco Nexus 6001 Chassis ("Nexus 64 Supervisor")
Intel(R) Xeon(R) CPU @ 2.00 with 8238120 kB of memory.
Processor Board ID FOC181506P3
Device name: xxxxxxxxxxxxxx
bootflash: 7823360 kB
Kernel uptime is 3 day(s), 17 hour(s), 25 minute(s), 49 second(s)
Last reset at 642096 usecs after Fri Feb 27 15:24:40 2015
Reason: Disruptive upgrade
System version: 6.0(2)N2(3)
Service:
plugin
Core Plugin, Ethernet Plugin, Fc Plugin
xxxxxx# conf t
Enter configuration commands, one per line. End with CNTL/Z.
xxxxxx(config)# slot 1
xxxxxx# port 47-48 type fc
ERROR: Module type doesn't support this CLI
Any help would be appreciated. Thanks
