stcli cluser info returns incomplete node information, I also have one computer only node that was added with a FQDN instead of the address and it doesn't show up in hyperflex connection as a node, but works fine.
dnsServers:
nodeIPSettings:
10.1.100.22:
10.1.100.23:
10.1.100.20:
10.1.100.21:
10.1.100.26:
10.1.100.27:
10.1.100.24:
----------------------------------------
addr: 10.1.100.24
stService: hypervisor
gateway: 10.100.2.254
subnetMask: 255.255.255.0
method: static
----------------------------------------
addr: 10.100.2.14
stService: stctl
gateway: 10.100.2.254
subnetMask: 255.255.255.0
method: static
----------------------------------------
10.1.100.25:
10.1.100.17:
----------------------------------------
addr: 10.1.100.17
stService: hypervisor
gateway: 10.100.2.254
subnetMask: 255.255.255.0
method: static
----------------------------------------
addr: stCtlVM-FCH2143V0JL
stService: stctl
gateway: 10.100.2.254
subnetMask: 255.255.255.0
method: static
----------------------------------------
vdi09.domain.com:
----------------------------------------
addr: 10.1.100.15
stService: hypervisor
gateway: 10.100.2.254
subnetMask: 255.255.255.0
method: static
----------------------------------------
addr: stCtlVM-FCH2134V09J
stService: stctl
gateway: 10.100.2.254
subnetMask: 255.255.255.0
method: static
