Hi Everyone,
Can anyone explain me what is the meaning of green X on the SAN Device manager port 5? Please see details below image and cli command. I am not sure if the port is faulty or just wrong information by device manager.
SANCORE-1B# sh int fc1/5
fc1/5 is up
Port description is SNCISQL01A HBA Slot 2
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:05:00:0d:ec:ba:9d:80
Admin port mode is F, trunk mode is off
snmp link state traps are enabled
Port mode is F, FCID is 0x870200
Port vsan is 2
Speed is 4 Gbps
Rate mode is dedicated
Transmit B2B Credit is 3
Receive B2B Credit is 16
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 12683848 bits/sec, 1585481 bytes/sec, 1261 frames/sec
5 minutes output rate 61312488 bits/sec, 7664061 bytes/sec, 4307 frames/sec
30170465636 frames input, 50914835047204 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
85246711848 frames output, 159546341238872 bytes
5 discards, 0 errors
224 input OLS, 4 LRR, 42 NOS, 0 loop inits
47 output OLS, 71 LRR, 186 NOS, 0 loop inits
16 receive B2B credit remaining
3 transmit B2B credit remaining
3 low priority transmit B2B credit remaining
Interface last changed at Mon Jul 22 15:14:06 2013
