We have a cisco MDS 9148S 16G 48 FC that's no longer under support, but's been running rock solid at our DR site for 7 years now.
It's a very static environment but we replaced a dead NetApp last week, which should have been as simple as updating the PWWN correct?
It's a single switch with two vsan for the A and B fabric. A side came up with out issue. B side is essentially the exact same config yet the connection fails to come up.....here's the part that's got me thrown, look at the show zone active output:
zone name CVTP10A_WDC_NetAPP vsan 300
* fcid 0xdf0f00 [pwwn 20:32:d0:39:ea:9a:ea:d5]
* fcid 0xdf0d00 [pwwn 21:00:f4:e9:d4:f4:4d:60]
zone name CVTP10A_WDC_NetAPP_B vsan 400
pwwn 20:33:d0:39:ea:9b:ea:d5
* fcid 0x140d00 [pwwn 21:00:f4:e9:d4:f4:4d:61]
what would cause that difference?
Here's the relevant configs:
sh flogi database:
fc1/10 300 0xdf0f00 20:32:d0:39:ea:9a:ea:d5 20:02:d0:39:ea:9a:ea:d5
fc1/15 300 0xdf0d00 21:00:f4:e9:d4:f4:4d:60 20:00:f4:e9:d4:f4:4d:60
fc1/16 400 0x140d00 21:00:f4:e9:d4:f4:4d:61 20:00:f4:e9:d4:f4:4d:61
fc1/39 400 0x140f00 20:33:d0:39:ea:9a:ea:d5 20:02:d0:39:ea:9a:ea:d5
sh fcns database
VSAN 300:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0xdf0d00 N 21:00:f4:e9:d4:f4:4d:60 scsi-fcp:init
0xdf0f00 N 20:32:d0:39:ea:9a:ea:d5 scsi-fcp:both
VSAN 400:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0x140d00 N 21:00:f4:e9:d4:f4:4d:61 scsi-fcp:init
0x140f00 N 20:33:d0:39:ea:9a:ea:d5 scsi-fcp:both
sh run for the vsan 400 side:
zoneset activate name WDC-Fabric_B vsan 400
do clear zone database vsan 400
!Full Zone Database Section for vsan 400
fcalias name WDC_NetApp_B vsan 400
member pwwn 20:33:d0:39:ea:9b:ea:d5
fcalias name CVTP10A_B vsan 400
member pwwn 21:00:f4:e9:d4:f4:4d:61
zone name CVTP10A_WDC_NetAPP_B vsan 400
member fcalias WDC_NetApp_B
member fcalias CVTP10A_B
zoneset name WDC-Fabric_B vsan 400
member CVTP10A_WDC_NetAPP_B
interface fc1/10
switchport description WDC_NetAppA
port-license acquire
no shutdown
interface fc1/15
switchport description CVTP10A_1
port-license acquire
no shutdown
interface fc1/16
switchport description CVTP10A_2
port-license acquire
no shutdown
interface fc1/39
switchport description WDC_NetAppB
port-license acquire
no shutdown
I'm starting to go blind I've been looking at this so much today if I'm missing anything just let me know....Thanks!
