zoneset question

[jankenbrandt]

Bit of a noob question here, but I am trying to learn the CLI after using DCMN for a while.  When I run:

show zoneset active on NX-OS 8.3(1) I get:

show zoneset active vsan 1

zone name xxx_HBA1 vsan 1

•fcid 0x0104c0 [pwwn 10:00:00:00:ff:ff:ff:ff]
•fcid 0x010dc0 [pwwn 23:41:00:02:aa:aa:aa:aa]
•fcid 0x010e80 [pwwn 22:41:00:02:bb:bb:bb:bb]

zone name yyy_HBA1 vsan 1
pwwn 10:00:00:90:fa:fa:fa:fa
•fcid 0x010220 [pwwn 50:06:0e:cc:cc:cc:cc:cc]
pwwn 10:00:00:90:dd:dd:dd:dd

Questions

1.I think understand, xxx all three are logged in, right?
2.Does yyy show 2 wwn's not logged in?

3.If 2 is right, FCID should be logged in, what is the star showing me?  Seems redundant. 
4.Is there a reference? Google is PAINFUL on this, same Cisco docs over and over. 

More than happy to RTFM but need the correct FM.  

[Walter Dey]

1.I think understand, xxx all three are logged in, right?

yes, zone xxx has 3 members, which have done successful flogin, and the FCID is shown
2.Does yyy show 2 wwn's not logged in?

yes ! * means successful flogin, and results in a FCID !

3.If 2 is right, FCID should be logged in, what is the star showing me?  Seems redundant. 

yes !
4.Is there a reference? Google is PAINFUL on this, same Cisco docs over and over. 

see eg. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/clibook/zone.html

Displaying Zone Information