6880 and 2960X Visio Stencils

[joseph-foley]

Hi, I'm planning a large deployment that includes both 6880 and 2960X switches.  Are there visio stencils available for these models?  If not, does anyone know when they will become available?

Thanks

[jasonbothe]

Did you ever get an answer for this?  

[joseph-foley]

I did not.  I'm currently using a .jpeg of the box.

[menonigeorge]

Any updates on it?

[joseph-foley]

Still nothing, I'm afraid.  You'd think they'd be on this considering how much they're pushing these platforms and how many people are buying them.

[Marko Pribanic]

The cisco inclued the Cat 6880 & 2960X stencils in there visio stencils library.

They can be downloaded from here:

http://www.cisco.com/en/US/products/hw/prod_cat_visios.html

[matthias.motte]

Yes right ! the "Switches-Catalyst 2960" archive contain 2960-X stencils ...I am not concern about 6880 but I can see some stencil on "Switches-Catalyst 6880" archive.

Thanks a lot for this topic

[adil.nasser3]

I checked the Switch-Catalyst 2960 archive and I didn't find the 2960-X stencil inside.  The archive date 23/May/2012.  If someone finds it, please let me know.

Thanks,

Adil

anasser@itctransco.com
 

[James Tuson]

Hi, 

For anyone else, like me, who didn't understand any of the replies below, what I did was:

- Download the latest 2960 stencil available - NO 2960X stencils visible

- Download the 6800 series stencil and add to Visio

- 2960X stencils were then visible in the 2960 menu. - ??

It's crazy but it worked for me

[njsanders1]

No, they do NOT. Only 2960S models are in that file.

[njsanders1]

NO THEY ARE NOT.  It's all 2960S models.  And nothing newer than 2015 or so.  THERE ARE NO TEMPLATES AVAILABLE FOR 2960X MODELS.

[James Tuson]

---

@njsanders1 wrote:

NO THEY ARE NOT.  It's all 2960S models.  And nothing newer than 2015 or so.  THERE ARE NO TEMPLATES AVAILABLE FOR 2960X MODELS.

---

Hey brother. I understand your frustration because I was in exactly the same situation some time ago.

Check out my reply at the bottom of the thread.

----------------------------------------------

Re: 6880 and 2960X Visio Stencils

For anyone else, like me, who didn't understand any of the replies below, what I did was:

- Download the latest 2960 stencil available - NO 2960X stencils visible

- Download the 6800 series stencil and add to Visio

- 2960X stencils were then visible in the 2960 menu. - ??

It's crazy but it worked for me

[James Tuson]

For anyone else, like me, who didn't understand any of the replies below, what I did was:

- Download the latest 2960 stencil available - NO 2960X stencils visible

- Download the 6800 series stencil and add to Visio

- 2960X stencils were then visible in the 2960 menu. - ??

It's crazy but it worked for me

[Sandeep Ramakrishnan]

You can check this page for a list of all stencils:
http://www.cisco.com/c/en/us/products/visio-stencil-listing.html

the 6800 stencil is available:
http://www.cisco.com/c/dam/assets/prod/visio/visio/switches_catalyst-6800.zip

the 2960 is also available:
http://www.cisco.com/c/dam/assets/prod/visio/visio/products_visio_icon0900aecd80395a84.zip

[James Tuson]

For anyone else, like me, who didn't understand any of the replies below, what I did was:

- Download the latest 2960 stencil available - no 2960X stencils visible

- Downlaod the 6800 series stencil and add to Visio

- 2960X stencils were then visible in the 2960 menu.