インストールされたGBICやSFPを確認する方法(Catalyst6500)

Takashi Higashimura · ‎2010-06-28

show inventory コマンドを使えば、スイッチにインストールされたモジュール等が確認できます。

Catalyst6500のIOSを 12.2(18)SXF5以降にアップグレードした場合には、下記のように show inventory コマンドで GBIC のシリアル番号が確認できません。

NAME: "Gigabit Port Container 2/3", DESCR: "Gigabit Port Container"
PID: , VID:  , SN:

この理由は、GBIC及びSFPがまだ UDI(Unique Device Identifier) に対応していないためとなります。

このような場合には、show inventory raw コマンドを使用すれば、PID(Product ID) を持たないエントリも表示されるようになります。

詳細は下記ページも参考にしてください。

How to Retrieve the Unique Device Identifier

yu.yoshida · ‎2011-03-23

いつもお世話になっております。

本件、以下の構成で確認しましたが、WS-G5484のSNが空欄のままでした。

ちなみにFan Tray(Fan2）のSNも空欄のままです。

Router#show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
3   16 SFM-capable 16 port 1000mb GBIC        WS-X6516-GBIC      SAD050xxxx
5    2 Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD0753xxxx

Router#show inventory raw
NAME: "WS-C6509", DESCR: "Cisco Systems Catalyst 6500 9-slot Chassis System"
PID: WS-C6509 , VID: , SN: SCA0544xxxx

NAME: "Backplane", DESCR: "Cisco Systems Catalyst 6500 9-slot backplane"
PID: , VID: , SN:

NAME: "", DESCR: "Container of VTT"
PID: , VID: , SN:

NAME: "WS-C6K-VTT 1", DESCR: "VTT 1"
PID: WS-C6K-VTT , VID: , SN: SMT0542xxxx

NAME: "VTT 1 OK Sensor", DESCR: "VTT 1 OK Sensor"
PID: , VID: , SN:

NAME: "VTT 1 outlet temperature Sensor", DESCR: "VTT 1 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Container of VTT"
PID: , VID: , SN:

NAME: "WS-C6K-VTT 2", DESCR: "VTT 2"
PID: WS-C6K-VTT , VID: , SN: SMT0542xxxx

NAME: "VTT 2 OK Sensor", DESCR: "VTT 2 OK Sensor"
PID: , VID: , SN:

NAME: "VTT 2 outlet temperature Sensor", DESCR: "VTT 2 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Container of VTT"
PID: , VID: , SN:

NAME: "WS-C6K-VTT 3", DESCR: "VTT 3"
PID: WS-C6K-VTT , VID: , SN: SMT0542xxxx

NAME: "VTT 3 OK Sensor", DESCR: "VTT 3 OK Sensor"
PID: , VID: , SN:

NAME: "VTT 3 outlet temperature Sensor", DESCR: "VTT 3 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Container of Clock"
PID: , VID: , SN:

NAME: "WS-C6000-CL", DESCR: "C6k Clock 1"
PID: WS-C6000-CL , VID: , SN: SMT0542xxxx

NAME: "Clock 1 OK Sensor", DESCR: "Clock 1 OK Sensor"
PID: , VID: , SN:

NAME: "Clock 1 In Using Sensor", DESCR: "Clock 1 In Using Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Container of Clock"
PID: , VID: , SN:

NAME: "WS-C6000-CL", DESCR: "C6k Clock 2"
PID: WS-C6000-CL , VID: , SN: SMT0542xxxx

NAME: "Clock 2 OK Sensor", DESCR: "Clock 2 OK Sensor"
PID: , VID: , SN:

NAME: "Clock 2 In Using Sensor", DESCR: "Clock 2 In Using Sensor"
PID: , VID: , SN:

NAME: "Sensor for counting number of OK VTTs", DESCR: "Sensor for counting number of OK VTTs"
PID: , VID: , SN:

NAME: "Sensor for counting number of OK Clocks", DESCR: "Sensor for counting number of OK Clocks"
PID: , VID: , SN:

NAME: "PS 1 Absent High Power Usage Sensor", DESCR: "PS 1 Absent High Power Usage Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Cisco Systems Catalyst 6500 9-slot Physical Slot"
PID: , VID: , SN:

NAME: "3", DESCR: "WS-X6516-GBIC SFM-capable 16 port 1000mb GBIC Rev. 2.0"
PID: WS-X6516-GBIC , VID: , SN: SAD0507xxxx

NAME: "", DESCR: "Gigabit Port Container"
PID: , VID: , SN:

NAME: "Gi3/1", DESCR: "1000BaseSX"
PID: , VID: , SN:

NAME: "", DESCR: "Gigabit Port Container"
PID: , VID: , SN:

NAME: "Gi3/2", DESCR: "1000BaseSX"
PID: , VID: , SN:

NAME: "", DESCR: "Gigabit Port Container"
PID: , VID: , SN:

NAME: "Gi3/3", DESCR: "1000BaseSX"
PID: , VID: , SN:

NAME: "", DESCR: "Gigabit Port Container"
PID: , VID: , SN:

NAME: "module 3 power-output-fail Sensor", DESCR: "module 3 power-output-fail Sensor"
PID: , VID: , SN:

NAME: "module 3 outlet temperature Sensor", DESCR: "module 3 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "module 3 inlet temperature Sensor", DESCR: "module 3 inlet temperature Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Cisco Systems Catalyst 6500 9-slot Physical Slot"
PID: , VID: , SN:

NAME: "5", DESCR: "WS-SUP720-BASE 2 ports Supervisor Engine 720 Rev. 3.0"
PID: WS-SUP720-BASE , VID: , SN: SAD0753xxxx

NAME: "", DESCR: "MSFC Container"
PID: , VID: , SN:

NAME: "sub-module of 5", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.0"
PID: WS-SUP720 , VID: , SN: SAD0753xxxx

NAME: "RP 5 outlet temperature Sensor", DESCR: "RP 5 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "RP 5 inlet temperature Sensor", DESCR: "RP 5 inlet temperature Sensor"
PID: , VID: , SN:

NAME: "CPU", DESCR: "CPU of Routing Processor"
PID: , VID: , SN:

NAME: "", DESCR: "Gigabit Port Container"
PID: , VID: , SN:

NAME: "", DESCR: "Switching Engine Container"
PID: , VID: , SN:

NAME: "sub-module of 5", DESCR: "WS-F6K-PFC3A Policy Feature Card 3 Rev. 2.0"
PID: WS-F6K-PFC3A , VID: , SN: SAD0753xxxx

NAME: "EARL 5 outlet temperature Sensor", DESCR: "EARL 5 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "EARL 5 inlet temperature Sensor", DESCR: "EARL 5 inlet temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 power-output-fail Sensor", DESCR: "Supervisor module 5 power-output-fail Sensor"
PID: , VID: , SN:

NAME: "module 5 outlet temperature Sensor", DESCR: "Supervisor module 5 outlet temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 inlet temperature Sensor", DESCR: "Supervisor module 5 inlet temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 device-1 temperature Sensor", DESCR: "Supervisor module 5 device-1 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 device-2 temperature Sensor", DESCR: "Supervisor module 5 device-2 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 asic 1 temperature Sensor", DESCR: "Supervisor module 5 asic 1 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 asic 2 temperature Sensor", DESCR: "Supervisor module 5 asic 2 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 asic 3 temperature Sensor", DESCR: "Supervisor module 5 asic 3 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 asic 4 temperature Sensor", DESCR: "Supervisor module 5 asic 4 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 asic 5 temperature Sensor", DESCR: "Supervisor module 5 asic 5 temperature Sensor"
PID: , VID: , SN:

NAME: "module 5 asic 6 temperature Sensor", DESCR: "Supervisor module 5 asic 6 temperature Sensor"
PID: , VID: , SN:

NAME: "CPU", DESCR: "CPU of Switching Processor"
PID: , VID: , SN:

NAME: "", DESCR: "Cisco Systems Catalyst 6500 9-slot Physical Slot"
PID: , VID: , SN:

NAME: "", DESCR: "Container of Fan FRU"
PID: , VID: , SN:

NAME: "fan-tray 1", DESCR: "Chassis fan-tray 1"
PID: , VID: , SN:

NAME: "Fan-tray 1 Status Sensor", DESCR: "Chassis Fan-tray 1 Status Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Container of Container of Power Supply"
PID: , VID: , SN:

NAME: "", DESCR: "Container of Power Supply"
PID: , VID: , SN:

NAME: "PS 1 WS-CAC-2500W", DESCR: "110/220v AC power supply, 2500 watt 1"
PID: WS-CAC-2500W , VID: , SN: ART080xxxxx

NAME: "PS 1 Fan Sensor", DESCR: "Power Supply Fan Sensor"
PID: , VID: , SN:

NAME: "PS 1 Output Sensor", DESCR: "Power Supply Output Sensor"
PID: , VID: , SN:

NAME: "PS 1 Input Sensor", DESCR: "Power Supply Input Sensor"
PID: , VID: , SN:

NAME: "", DESCR: "Container of Power Supply"
PID: , VID: , SN:

showコマンドでFAN2,WS-G5484のシリアルナンバーを確認することは不可ですか？

Takashi Higashimura · ‎2011-03-23

上記ご質問ですが、IOSバージョンや機器構成の確認、切り分け等による調査が必要と考えますので、確認が必要でしたらお手数ですが弊社サービスリクエストにてお問い合わせいただけますようお願いいたします。