Tools

I am proud to announce general availability of YDK maintenance release 0.8.6.3. It is available now for download from the CiscoDevNet GitHub repository. The following changes in the code were introduced since release 0.8.6.2: New features and enhance...

Hi Cisco Yang team ,Yang suite tool will support to build RPC for Drivenet devices and any other devices  or its only support Cisco platform ex.ios-xr , ios-xe models. Please let us know . Thanks Jay+91-8861883300 

Hi Team, Could you please kindly give me some advice for the questions regarding POSTMAN+ Yang Data ? Thanks a lot.   Here is link in POSTMAN https://ios-xe-mgmt-latest.cisco.com:9443/restconf/data/Cisco-IOS-XE-interfaces-oper:interfaces/interface=Gi...

Hello everyone,   I am using Mac to try to learn python, pyats and genie for automation and seeing the following problem when I reach to the step that load the testbed into Python.   from genie.testbed import load # load the testbed filetestbed = loa...

i am trying to extract a report from Cisco prime ( 3.1) for external antenna used on Access points. i have tried the Curl scripts, however it is not giving me the accurate output is there any other way to extra such a report. any help is greatly appr...

I tried to install an SSH server inside Packet Tracer but it doesn't work for unknown reasons. I used these commands on the Switch: Switch(config)#interface vlan 1 Switch(config-if)#ip address 192.168.100.2 255.255.255.0 Switch(config-if)#no shutdown...

Hello, When trying to configure CAT9K switch interface via RESTCONF, getting device refused one or more commands error, provided below the tried steps. Used POSTMAN tool. Get the individual interface details.GET https://192.168.43.2/restconf/data/Cis...

Hello,   When configuring the FEC to 'base-r' on a 8800-LC-36FH-2 using the Cisco_IOS_XR_um_interface_cfg with YDK, the following INVALID_TYPE error is seen while executing the crud_service.py device.create on the RPC:   crud_service.py 160 Info---- ...

Spoiler (Highlight to read)   Hello,   When trying to configure “controller optics 0/0/0/3 perf-mon enable” on a NCS5500 I get the “’Controller’ object has no attribute ‘perf_mon’” error even though the Cisco-IOS-XR-um-interface-cfg.yang augments the...

This learning lab is wrong and needs to be removed https://developer.cisco.com/learning/lab/intro-yangsuite/step/1