Is there a way to disable enable password on the testbed when connecting to Cisco devices ?I'm trying to do genie parser but it fails since I don't have access to enable password. I can only login to user mode.2022-06-07 04:27:51,438: %UNICON-INFO: c...
Hi,
Is there a way for flexconnect AP in standalone mode (disconnected from WLC) to do local PSK authentication for an SSID?
I'm looking for the configuration guide on this and not sure if "ap local authentication in flexconnect profile" is the setup...
Hi,
Can anyone clarify if it's really supported for 100Mbps connection RJ45 for this particular linecard?
N9K-X9564TX
I found one document but need clarification on this.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-swi...
Hi,
Does Nexus 9500 support the Nexus 2K?
Based on this release notes, it supports on that release: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/release/notes/70321_nxos_rn.html#_Toc430850301
Can anyone confirm? and does ...
Hi,I'm just wondering if it's possible to integrate cisco access point (either lightweight or autonomous) with other wireless vendor, such as ruckus, HP wireless, aruba, etc.Is this integration possible ? any document that can explain it?thanks
i tried this method before, but somehow it doesn't work (flexconnect local auth under SSID config).
client are not able to join the ssid.
i have flexconnect group with "ap local authentication enabled", but i don't want to use EAP/PEAP locally from t...
Based on release note 1.5(1), VIC 1225 is supported for iSCSI boot.http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/OL-28995-01.htmlBut not sure for P81e, as I can't find information for this.
prkrishn,does the northbound or southbound traffic have something to do with the FI port type here?I'm not too clear with your statement that "vFC would be a F or a TF port on the FI going down to the server blade Mezz card." Does it have something t...
Hi, AbhinavI connect to nxos from the FI and do the command "sh int br". It shows there that the vfc use "F port" as the operating mode. What port should it be as the oper mode? F port or VF port if we use FCoE?EC
