About Luke Oxley

Luke Oxley · 09-19-2016

Afternoon, I am trying to understand how the threat detection feature shuns attackers. From my understanding, taking in to consideration the line of configuration below, if a host were to send 45 SYNs in 1 second then it would be logged as a threat a...

Luke Oxley · 08-04-2016

Hello, I am currently working on my home router to enable me to VPN in remotely using Cisco VPN Client on my laptop when out and about. I am using a Cisco 857w router running IOS 12.3(8r)YI4. The issue I am having, is that with the current configura...

Luke Oxley · 06-13-2017

Hi wilsonsant, You haven't got basic layer 3 connectivity to the firewall from your VM. Verify VM network configuration from the OS and from whatever hypervisor you are using. Once this is restored, AnyConnect should work as it does in your physica...

Luke Oxley · 06-13-2017

Hi [@tony.elrassy], Thanks for your post. By default, the router is not natively a stateful or stateless firewall, we must tell it if we would like it to function anything beyond that. If you are NAT'ing however, this will add a basic layer of secur...

Luke Oxley · 06-13-2017

Hi wilsonsant, It sounds like the VM instance no longer has connectivity to the head end, whether that be IP or specifically the SSL port. Are you able to ping the AnyConnect (typically the WAN or outside/north facing) interface from the VM? Look f...

Luke Oxley · 10-28-2016

Bal, Sorry I didn't get back to you over text mate - got side tracked at work. Thought I would reply on here for a giggle. Before you can start, you firstly need to know three things. The new IP address for the outside interface.The subnet mask for ...

Luke Oxley · 10-10-2016

pusaxena and shivdube, Thank you both very much for your help. Kind regards, Luke Oxely Please rate helpful posts and mark correct answers.

Member Since	‎07-25-2016 09:30 AM
Date Last Visited	‎04-22-2020 12:29 AM
Posts	143
Total Helpful Votes Received	155

User Statistics

User Activity

Threat Detection - Cisco ASA

Cisco Easy VPN Server - Unable to communicate with inside network.

Hi @wilsonsant,

Hi @tony.elrassy,

Hi @wilsonsant,

Bal,

@Pulkit Saxena and @shivdube,