When you try logging in what do the logs in ISE say? Are you getting a success in ISE but not being allowed to log in to DNAC? I had a similar issue and I ended up having to create a new Authz profile specifically for DNAC, we have our main Authz pro...
License consumption is based on successful auths. For more info if you are using smart licensing on ISE 3.x if you go to Administration > Licensing and scroll down to the bottom you should be able to click on the number of consumed licenses to see th...
On some devices you can add noconfirm to the end of the command to get past that confirmation prompt. If you type in the command from the screenshot and then type ? it should give more info on the command and if the noconfirm option is available.
There are a number of steps required for an ISE upgrade and it really depends on your node setup.If you have a look at this guide: https://www.cisco.com/c/en/us/td/docs/security/ise/3-3/upgrade_guide/Upgrade_Journey/PDF/b_ise_upgrade_guide_3_3_pdf.pd...
Hi Sergey, So once the user cert is downloaded to the machine the user authentication works after a reboot or a logoff/logon?How long is the delay after the user logs on for the cert to be downloaded? Do you see failures in the ISE logs from that mac...