need assistance with DMVPN solution. Remote/spoke routers (2811s) will connect via to one of two DMVPN hub routers (7206s - no load sharing, just hub redundancy). Spoke to hub will be using EIGRP. DMVPN hub routers will then redistribute spoke rou...
what AAA statements would permit a remote user, via SSH or Telnet, to access an ASA, with 8.0 code, which is configured for AAA TCACS authentication and authorization if and when network communication to the TCACS servers are lost?
Has Cisco quit supporting the 5xx series PIX software?I wanted to download 8.0 code for a 515e, but all of the PIX 5xx options do not provide image for download. Is that it for 5xx software support?thanks, Kevin
I have a ASA upgrade, where a 5520 ASA configured for transparent is currently supporting EIGRP with only ACLs - permit eigrp ..... source destination (host 224.0.0.10) - the replacement 5550 ASA will be configured for routed mode and a "router eigrp...
Jon, great link, thanksso, even though there are numerous ACLs assigned to, let's say, both the inside and outside ASA's interface, there no longer is the need for "permit eigrp source destination" ACLs?thanks, Kevin
hi Giuseppe,yes, one remote location has an issue with two local applications going outbound which are over ultizing the site's WAN circuit.thanks, Kevin