About Alexander.Kuchumov

Alexander.Kuchumov · 06-07-2020

Dear all, I had an issue with Static NAT, the task is - RADIUS client must be masqueraded from real IP 192.168.53.240 to assigned 192.168.46.1i'we made my config as it in ASA Book: My config: object network RADIUS host 192.168.46.250 object network ...

Alexander.Kuchumov · 07-16-2020

Hello, Ed, Did you enabled esmtp inspection on ASA? Basically, you need only inspection and correct ACL, that allow access to your server. Alex

Alexander.Kuchumov · 06-10-2020

So, i found a solution: object network RADIUS subnet 192.168.53.0 255.255.255.0!nat (G_STAFF_OUTSIDE,G_STAFF_INSIDE) source dynamic RADIUS interface!access-list A_RUCKUS_INCOMMING extended permit udp any4 any4 range 1812 1813access-group A_RUCKUS_INC...

Alexander.Kuchumov · 06-08-2020

Dear Sheraz Salim, Nope, i tried:ASA(config)# object network RADIUS ASA(config-network-object)# host 192.168.46.250 ASA(config-network-object)# nat (G_STAFF_INSIDE,G_STAFF_OUTSIDE) static 192.168.53.236 access-list OUTSIDE_IN extended permit udp any...

Alexander.Kuchumov · 06-07-2020

Dear Sheraz Salim, Thanks for your quick reply, i tried your example with error:ASA(config)# object network RADIUS ASA(config-network-object)# host 192.168.46.250 H9764-GST-ASA(config-network-object)# nat (G_STAFF_INSIDE,G_STAFF_OUTSIDE) static 192.1...

Member Since	‎02-16-2020 10:51 PM
Date Last Visited	‎07-30-2020 06:04 PM
Posts	5

User Statistics

User Activity

ASA (9.6) Static NAT with ACL

Re: Cisco ASA 5525 and Exchange 2010

Re: ASA (9.6) Static NAT with ACL

Re: ASA (9.6) Static NAT with ACL

Re: ASA (9.6) Static NAT with ACL