Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I would be appreciated if you give me a hint regarding the issue I have. I configured easy vpn on c2800nm-advipservicesk9-mz.124-15.T15.bin using Xauth and RRI (split tunneling), can even connect using Cisco VPN client (Windows version 5.0.07...
Greetings!First, let me explain the situation. We had Oracle DB servers connected to ip core network clearly, but now we have connected them through ASA (8.4). From that time all users complains about frequent TCP (oracle tcp port 1521) connections d...
Greatings!Gyes, we had such kind of issue: while installing 2 SSM-4GE modules to 2 ASA 5540 (Active/Standby) the firewall is splitted. That's my step:1) Turn off standby ASA and plug SSM-4GE module2) Power it OnAfter it was booted up failover relatio...
Greetings!Dear colleagues, please help me to make correct configuration of crypto map. I need to make l2l IPSec on cisco ASA but I don't know how to specify interesting traffic.Site A has IP address 172.24.4.4Site B has IP address 10.0.129.184To acce...
Hi~Could you please tell me how can I make user access for CLI (shell) on ACS appliance by means of WEB GUI. The point is that I have ACSAdmin as well as another administrator role users, but can't get access to appliance through SSH (Permission deni...
Jennifer Halim написал(а):Also, I didn't see the following but i assume that you have applied it to the outside interface:crypto map Cl_map_out interface OUTSIDEYour assumption is correct dear Jennifer. SA is not formed, sodebug crypto ikev1 shows th...
Jennifer, thank you, I've missed in input ACL. Please, look pon capture output. Semms problem is in VPN. How can I troubleshoot it. Crypto sec isakmp is empty for that peer.# sh capture XXX trace 2 packets captured 1: 14:11:44.837893 172.24.4.4.454...
then either you need to enable more detailed logging on the ACS applicance How can I do this?or the RADIUS requests from the APC cards aren't reaching the ACS applicanceThis is what I'm trying to find out.Are there any firewalls, etc between the two ...
