Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all , i got a lab and i would like to get some help.
I have a router with for example .. 50mbps from the isp.
I want that specified ip (for example 192.168.1.2) will have better QoS on the network, i mean that he will get more resource from t...
Hello , so i got a school project and i would like to get some help guys.Actually need more an expert-advise. This is my project -
The mission is pretty simple , but i stuck on the default route.Lets consider PC-1 As a remote customer that supp...
Hello , i have the next topology -
I tried to practice on PBR , when R1 ping R3 Loopback address it will match the Policy based routing.
I did the following configuration on R1 but don't see any match:
access-list 101 permit ip any host 200.2...
Hello all. I'm doing a lab of HSRP and the target is when I lose reachability to the ISP I want the second router to be active.
My Topology :
I did a shutdown on fa0/0 on isp to lost reach-ability to the ISP from R1 and check again R1 , seems to ...
Thanks for the response , but how is it make sense ? isn't the purpose of standby 1 preempt is if the active router with higher priority failed for some reason , the standby router will become active , but if the Router for example R1 (with the preem...
Thanks for the response , but how is it make sense ? isn't the purpose of standby 1 preempt is if the active router with higher priority failed for some reason , the standby router will become active , but if the Router for example R1 (with the preem...
