About robbytacheny

robbytacheny · 05-03-2018

I want to have a Meraki PDU that integrates with combined networks or as standalone network. It needs to do a few things:1. Monitor usage and devices and log for 30 days. 2. Monitor at least two connections (via wired ethernet) and power cycle ports ...

robbytacheny · 02-04-2020

Batch Imaging and deploying 75 computers caused pool to fill up. Count me as one more vote for a method to manually clear inactive DHCP leases. T-800

robbytacheny · 06-20-2018

If each WAN port is getting its own public IP, I don't see why this wouldn't work. Its not truly redundant, but it should work for aggregation. I have a an MX84 that is ultimately doing something theoretically similar, but not for the purpose of aggr...

robbytacheny · 06-20-2018

I believe the ASA's were true L3 gateways, but they may not have been as picky about ARP, or basically may have just played nicely with each other. There are certainly other options as to why, but I wouldn't worry about trying to figure out why it wa...

robbytacheny · 06-20-2018

Yes there is something fundamentally wrong with your setup. You essentially have a "flat" LAN and achieve fail-over by changing the gateway address on the NIC of the PC/device. You don't have 2 LAN's and you don't have separate networks. (This is how...

robbytacheny · 06-06-2018

Meraki uses "lifetime-kb-unlimited" and there is no way to change this. We had an issue where we were doing MX VPN's to Cisco ASA and this is what was recommended bu Meraki support. I believe this is also why Azure tunnels won't stay connected. You n...

Member Since	‎11-28-2016 07:23 AM
Date Last Visited	‎10-02-2019 02:03 AM
Posts	7
Total Helpful Votes Received	12

User Statistics

User Activity

New product category: Meraki PDU

Re: Clear DHCP leases - MX84

Re: WAN1 and WAN2 same subnet

Re: Two MX84 on same network

Re: Two MX84 on same network

Re: VPN stops passing traffic between Meraki Security Appliances and Watchguard M300