About peter.warwick

peter.warwick · 10-18-2017

Hi All, We have a Cisco 2960x switch that has been in production with no issue for around a year and a half. Connected to the ports are a bunch of 8811 IP Phones that we use on CUCM and staff Laptops. Yesterday my colleagues' phone was working f...

peter.warwick · 07-11-2017

Hi All, A bit of a random one. I have a Cisco Unified Attendant Console that has been switching states from available to unavailable randomly during the day. Therefore all Calls to the user are sent to the message bank instead of being picked up. ...

peter.warwick · 06-18-2017

Hi Guys, We have been following the instructions on how to pair wireless microphones with a Cisco 8831 CP however we have had no luck. when we go to pair, we hold the microphone down until the red light is solid and then release, at which point not...

peter.warwick · 02-12-2017

Hi all, I have a customer who is unable to dial a users' specific DN from the CUAC. When she calls the extension from the console, it say's that the number is not connected. When she calls the users full number she gets through. All other extensi...

peter.warwick · 12-07-2016

In a Recent Jabber call, some calls appear to not have a prefix (no +61/64 and no 0 neither). Translation patterns appears to be correct. This issue seems to only be affecting one user within a site. Does anyone have any ideas?

peter.warwick · 10-19-2017

Hey Akumarka, IP Phone is connected. sh power inline Gi1/0/38 auto off 0.0 n/a n/a 30.0Gi1/0/39 auto on 6.3 IP Phone 8811 2 30.0Gi1/0/40 auto off 0.0 n/a n/a 30.0Gi1/0/41 auto off 0.0 n/a n/a 30.0Gi1/0/42 auto off 0.0 n/a n/a 30.0Gi1/0/43 auto of...

peter.warwick · 10-19-2017

Hi Leo, The phone is connected but still saying not connected. SW1#sh int gi1/0/43 controllerGigabitEthernet1/0/43 is down, line protocol is down (notconnect)Hardware is Gigabit Ethernet, address is 00f8.2cb6.feab (bia 00f8.2cb6.feab)MTU 1500 by...

peter.warwick · 10-18-2017

Hi Meheretab, I have tried that and no success. Any further ideas? Cheers,Pete

peter.warwick · 02-14-2017

How could I confirm this? I have also found that the telephone number in the users "end user configuration" is not correct to the location. Although the same city, the mask comes from a different site and the extension is correct. Would this be a ...

peter.warwick · 02-13-2017

The customer is unable to dial the 4 digit extension (1234) for a specific user. However, if she dials the user's full number (7 3637 1234) she gets through to the user. The user she is attempting to dial is a CUCM user and is in the same company a...

Member Since	‎11-30-2016 10:09 PM
Date Last Visited	‎10-10-2019 12:29 AM
Posts	13
Total Helpful Votes Received	5

User Statistics

User Activity

2960x switchport issues

Cisco Unified Attendant Console switches state randomly

Unable to pair wireless microphone to Cisco 8831 CP

Cisco Unified Attendant Console Advanced unable to dial a specific DN

Call back within Jabber is not working.

Re: 2960x switchport issues

Re: 2960x switchport issues

Re: 2960x switchport issues

How could I confirm this?

The customer is unable to