I am using aaa authentication ppp default radius if-needed command in AS5814 access server.but I am getting authentication through pre-dial screen on dialup and for post-dial screen , I am getting error as authorization failed.please comment.
I have AS5814 configured for dialup customers. But after working properly for 4-5 days, modem card hangs and after rebooting the dial-shelf, it again starts working . please suggest.
Problem:: A dial-in customer has to use the IP address from the pool I have defined in my RAS router. But some users by mistake are using static Ip addresses ( One of my Login Server IP address of that particular POP, which does not belong to the Dia...
Hi,Actually the binary form of the register value (0x2102) is 0010 0001 0000 0010and for (0x2142) :0010 0001 0100 0010Hence starting from far-right, you have turn bit 6 ON , not bit 7.Anyway for more details , you can mail me atsumeer_bhat@yahoo.com
Hi,This is the aaa config :aaa new-modelaaa authentication banner ^C WELCOME TO NIB HYDERABAD ^Caaa authentication fail-message ^CCCCCAccess Denied...Please check your Login name and Password.^Caaa authentication password-prompt "Password :"aaa authe...
Hi,you can use password recovery procedure of your router (using confreg ) which will remove your running-config but not startup-config(nvram) . then copy running-config to starup-config and provide username and password before exit .For more informa...
