Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello to all and Merry Christmas!!!I have a RV345 main router at the office. It conects locally a a few PCs using Vlan2 with IP:10.0.0.1/24I've also connected remotely using L2tp vpn a few laptops and assign dinamically for them IPs from network:10.0...
Hello,I configured very easy the SSL in RV345 Vpn router, according this doc: https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5519-configure-secure-sockets-layer-virtual-private-network-ssl-v.htmlI tri...
Hello,I use Anyconnect from my laptop to connect to RV345 router ( using the group authentication with pre-shared key - username and password)-so certificate option from client to site remain unchecked. The problem is I cannot connect it because anyc...
At RV345 I setup Vlan 1:IP=10.0.0.1/255.255.255.0; DHCP=10.0.0.100-10.0.0.149, and PCs from the office can see each others and access internet. At VPN menu, even I choose PPTP, or L2tp,or client to site, it not allowed me to put the range IP address...
The mask for 10.0.0.104 was 255.0.0.0.So I've changed it in 255.255.255.0 and ping works so I can connect to the server.Thank you for best cooperation. Also it works with 255.255.0.0..I don't understand why.
No ACP is configured. External users get IP from class 10.0.1.61-10.0.1.80. When they ping 10.0.0.104,they get the error:C:\Users\pc>ping 10.0.0.104Pinging 10.0.0.104 with 32 bytes of data:Request timed out.Request timed out.
Thank youIt works, but because I get a security warning about untrusted server certificate, also I need to know what is the procedure to install a certificate(selfcertificate?) inside the client to match the server.Thank you
I don't want to use a certificate,only user and password. I expected RV345 not to ask about certificate if this option wasn't choosen. I don't find logs in anyconnect, but from the message history I can see only it try to connect, then attempt failed...
