Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day All, I have the requirement to replace a currently running ASA 5550 with a new 5555 (actually must do this twice)I have, using the Quick Start guides, and with help from here, got the new 5555 up and running, with a default config, and the l...
Hi All, I have a newly upgraded 5555-x.There has been a reported vunerability apparently.Can someone tell me what are the latest versions pls and if you don't mind if I need to how best to patch / update.Running Tools, Check for ASA/ASDM updates says...
Greetings all. I have 2 x CISCO ASA 5555x 'sFirewall 1 - fresh box install, worked a treat, now happily logged in to ASDM - ASA and Firepower2nd needed a re-install so after much fighting I am in theory nearly there (I hope) I followed : https://www....
Hi All, Want to fresh install a 5555-xSo far via Terminal :1. Reset deviceconfig tconfigure factory-default 2. Reboot deviceReload 3. Config interface Management0/0no shutdowninterface GigabitEthernet0/0nameif outsidesecurity-level 0ip address dhcp s...
Greetings one and all.Newbie here setting up a shiney new CISCO ASA 5555-XI followed the Quick Start Guide here : https://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/5500X/5500x_quick_start.html#pgfId-131177 Pulling out collective hair out...
@Rob Ingram Morning. I notice there are a whole host of ASA updates (the ASDM check for updates option finds them), up to ver 9.14.1 it seems.Do I just go through the upgrade wizard one by one, and are they all OK to apply ?
Rob, OK fair dues.. only puchased in 2019 I believe.. ahh well.Will crack on with the re-image, thanks will report back, your help is much appreciatedHave a nice weekend, Cheers,Slip
The 5555-x is older hardware ?The packing list states SF-ASA-FP6.2.2-K9 CISCO Firepower Software V6.2.2 for ASA 5500-X and ASA5555 Control Licence.Just wondering really, if the wrong thing was ordered fair dues I will attempt the re-image..
Rob,Is that because when I ran the original install through it put the FW in ASA only mode or the like ?I followed this : https://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/5500X/5500x_quick_start.html
@Rob IngramMorning, OK the decision is to go with FDM..A quick question if I may, do I have to reimage the FW ? as it is allready running Firepower (as licenced etc through the Quick Start guides and I can see all the Firepower tabs in ASDM..Cheers,S...
