Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I recently setup a client-to-site L2TP VPN Server with radius authentication. When remote clients connect to the L2TP VPN, their internet traffic is routed through the VPN connection. We would prefer to not route internet traffic through the V...
Correct. I ran a speed-test on one of the remote laptop's while connected to the VPN. it was only getting 5mb/s up and down. The rv345 has gigabit WAN, so these speeds are not ideal. Unchecking "use default gateway" usually stops the VPN client from ...
I'm having the same issue updating my RV345 firmware from 1.0.03.22 to 1.0.03.24. The rv345 can successfully perform a DNS lookup and can ping 8.8.8.8. Computers on the LAN have no internet access. The site-to-site VPNs are all connected, and LAN co...
Two weeks ago I drove for 2 hours to the site, performed a factory reset on the router, updated the router firmware to the latest version (RV32X_v1.4.2.22), and spent over an hour reprogramming the router.Roughly 1 hour ago, the internet went out at ...
Does anyone have a fix for this aside from doing a factory reset? I'm experiencing the same issue on one of my routers since yesterday morning. The certificate is invalid because it's date range is 2062 to 2072. When accessing the router on port 8443...
