Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HP has a vbs script that reads the serial number from BIOS - It works on IBM servers too:http://h41111.www4.hp.com/hps/carepack/emea_middle_east/en/getserial.htmlIf web access from the server is restricted, you could RDP/VNC to server:Open a Notepad,...
I suggest first to map out the inter-switch connections (trunks or access) using "show cdp neighbors).Note the MAC address of the PC/PDA you are testing with, connect to a network port and telnet to a switch (the switch you would expect it to be conn...
See the document on CCO:http://www.cisco.com/en/US/products/hw/switches/ps679/products_tech_note09186a0080094b30.shtmlIf your modem is set up for 9600,n,8,1 and hardware flow control disabled, you should get a "console" session (if your cable is soun...
use the log keyword (or log-input)deny tcp host 192.168.1.1 any eq smtp log(Optional) Causes an informational logging message about the packet that matches the entry to be sent to the console. (The level of messages logged to the console is controlle...
Try:dialer map ip 192.168.252.183 name CSC183_18_1 broadcast speed 56 01094112466655.I have seen this symptom when you do not have a 64K end to end service