Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,I tried to block call from Calling number with any character but it seem not work. Below is my rule:Please advice how can i block incoming call with a-z character. dial-peer voice 1221 voip description Inbound Sip translation-profile incom...
Dear All,Currently i am using free radius to store CDR of call from my cisco AS5400XM which using acct-template callhistory-detail in cisco to send all fields to radius server. All fileds look are readable but i could not understand about noise-level...
Dear Admin,I am using AS5400XM Version 12.4(11)T4 and now i need to send CDR accounting to Multiple radius server at the same time. Currently i am using radius-server vsa send accounting to send CDR to radius sever= 192.168.1.2 but appear not have en...
Dear All,As i have reseached a week ago about binding signaling and media over voice gateway but seem no any clue about binding signaling+ Media on multiple loopback interface.The reason i ask like this because i have reserved pool of 192.168.0.1/24 ...
Dear Admin,I have tried few day already to match inbound call base on Calling number. Call made from calling number range 8000-9 and try to terminate the call by prefix 332168 thru TDM link but it was not work.Below is my scenario and configuration d...
Hi Huong,Thanks for your response. the call flow is : (Originate Gateway) SIP ----> SIP( Terminate Gateway )-----> PSTN---> Mobile phone.Here is my dial-peer config:dial-peer voice 123998 voip description Inbound Peer Aicent translation-profile inc...
Dear Robin,Referrece to http://www.cisco.com/en/US/docs/voice_ip_comm/pgw/9.8/Provisioning/Guide/R9PlnPrv.html and found that maximum of True OPC=6.But as provision multiple OPC via this link http://www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/provis...
Dear Robin,Now i can add my secodary OPC with another session set port but after done configuration i found SS7 was not Up.Here is my alarm in PGW: "abc-linkset-xyz: 2012-07-12 00:07:23.236 ICT,ALM=\"FAIL\",SEV=MJ" "abc-ss7-xyz: 2012-07-12 00:07:...
