Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,As the topic : Can same security level command create identity nat? I found identity nat when show xlate debug command although no configuration related to identitiy nat for those subnet ip address.My brief configuration- same security level i...
Hi all,I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked th...
Hi Guys, I got a problem about Guest user after create guest account from ISE sponsor. When i try to login with guest user on Web authen (WLC) it show login error and the message on ISE is Authentication failed ...
Hi all,I was deploy new site-to-site between ASA 8.0 (HQ) and ASA 8.4 (Branch). Everything working fine but i have a problem about manage to the remote ASA that i can't manage ASA branch with Inside interface IP address.My configuration on Remote AS...
I got problem with testing 802.1x MDA. The AUTH-MGR notified me with weird error messages.*Mar 1 06:41:05.610: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up*Mar 1 06:41:17.470: %AUTHMGR-5-START: Starting 'mab' for client (a8b...
Hi rleivaoc,It's true that FWSM will create a xlate for all connections but it wouldn't show up anymore if xlate-bypass enabled. I mean traffic that pass through FWSM because FWSM NAT on Hardware not Software like ASA.
Hi dsdavid,- For External Web auth, WLC will check Global configuration (Security > Web Auth) first then check in individual SSID thus try to configure External Web authn at the Security menu. If you have the SSID that need to use internal web auth, ...
Hi dsdavid, Do you use ISE with WLC? If yes, you need to configure ISE as External Web Auth at WLC? WLC Security > Access Control List Allow traffic from Client to ISE * If you have firewall or ACL on Core switch between WLC...
Hi DENNISThank you for reply I found the solution for solve my problem. I have to configure External Web Authentication on WLC as ISE. http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076f974.shtml
