Hi there,I have searched for information on how to install an SSL key + certificate on our SR520 from the CLI. I have found the following document, but that did not help much.http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6657/pr...

What works on some SR520s does not work on a new one that I bought:SR520(config-if)#interface Virtual-Template1SR520(config-if)# ip unnumbered Dialer0SR520(config-if)# ip nat insideSR520(config-if)# ip virtual-reassemblySR520(config-if)# zone-member ...

How can we specify from the IOS CLI that all traffic going to/from Dialer0 is repeated on interface FastEthernet1 so we can monitor some problems that we are having?I have Googled but I could not find the command to use on the SR520.

Hi there,we have an SRW248G4 that we are running out of the box (no VLAN's defined). There are machines on several subnets connected to it. This works without any problems.We have an SR520 configured to be attached to the SRW248G4; it has the 192.168...

Hi there,we setup a VPN Server from the CCA. We used the default Security -> VPN Server path. We then exported the VPN Profile to a PCF file.The Cisco VPN client works fine on 32bits operating systems.How do we set this up on Vista and Windows 7? The...