Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I know Cisco has guidance in the “Cisco Catalyst 9800 Series Configuration Best Practices” document, but there is one area that is unclear to me.I am looking to restore a configuration to a Cisco Catalyst 9800-80 WLC. The previous configuration co...
Hello,I am looking for the recommended configuration for interim update interval on a Catalyst 9800 Wireless LAN Controller. We are currently running version 17.12.5 on our 9800s and use ISE 3.4. This is how we currently have the 9800s and Policy Pr...
Hello,I believe I'm currently running into this bug as I have wireless client vlan-persistant enabled. https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwk37983Does anyone know the implications of removing this feature on a live production 9800 WLC w...
Hello,I have a Catalyst 9800-80 running version 17.9.6 and Cisco ISE 3.1. I want to configure wireless clients connected to an SSID using iPSK/MAB to dynamically change their VLAN and reference an ACL that resides on the 9800.I understand that dACL s...
Hello,I understand that in order to send syslog messages from APs to a syslog server the syslog server needs to be defined in the AP join profile the APs are attached to. Is there a way to change the port number to something else other than the defa...
Thank you.Does anyone know if the following still applies to 9800 WLCs? I pulled the following from: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71978-acl-wlc.htmlConsiderations When ACLs are Configured in WLCsALCs in ...
How would I do this if I just wanted to copy the config from startup and reload? Or would the only way be to manually paste password encryption aeskey config-key password-encrypt <your-master-key>and then the rest of the config?
I tried to restore a backup config to a lab 9800-L-C and since the backup contained password encryption, I got a bunch of errors when restoring. Is there any way to bypass this or do I have to manually put in the keys unencrypted?
