09-11-2023 07:54 AM
Good day,
I have couple of devices are connected to AIR-AP3802I-B-K9 then to WLC 9800.
Capturing trrafic on WLC-9800 17.9.3 and the Switch show the following
The captures showed the DHCP server kept sending unique offers to the devices.
The capture from the WLC showed the discover & offer packets were recieved.
The capture from the switch showed the offer packets only.
Both WLC & switch showed no request or acknowledgment packets.
I moved the AP to WLC 8540- 8.5.182.105, and the devices get connected rightaway with no issue.
Any advice?
Thanks
09-11-2023 09:38 AM
- Have a checkup of the WLC 9800 configuration with the CLI command show tech wireless ;feed the output into :
https://cway.cisco.com/wireless-config-analyzer/
Pick a client , and perform (client) debugging according to : https://logadvisor.cisco.com/logadvisor/wireless/9800/9800ClientConnectivity
You can have client debugs analyzed with : https://cway.cisco.com/tools/WirelessDebugAnalyzer/
M.
09-12-2023 10:09 AM
I uploaded the show tech wireless to the analyzer and "run", but no result
09-12-2023 10:22 AM
>...I uploaded the show tech wireless to the analyzer and "run", but no result
- Remember to use show tech wireless for WirelessAnalyzer not (simple) show tech , neither show tech-support
M.
09-12-2023 10:25 AM
Yes it is.
09-12-2023 11:09 PM
- You can attach it here , I will have a look at it ,
M.
09-13-2023 05:04 AM
It is not recommended to be on the public website
09-13-2023 05:10 AM
- You can also attach it to me within a private message,
M.
09-12-2023 03:14 AM
Hope you followed 9800 best practices & no SVI defined for wireless user vlans on 9800
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html#Wirelessclientinterfaces
IP helper address define on upstream switch (L3 device) and 9800 acting as a L2 device
HTH
Rasika
*** Pls rate all useful responses ***
09-13-2023 05:05 AM
FYI, I opened a ticket with the Cisco TAC, and for four months they were unable to resolve it.
08-08-2024 09:05 AM
Did you ever get this figured out? I'm having a similar issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide