About RJJ36838

RJJ36838 · 04-18-2020

I have a situation where I need the Anyconnect VPN clients to reach a remote site over a site to site tunnel.After troubleshooting I restarted the configuration by following the steps here: https://www.petenetlive.com/KB/Article/0000040I used the 8.3...

RJJ36838 · 04-24-2020

NAT from the remote ASA:Manual NAT Policies (Section 1)1 (UserData) to (any) source static 3.3.3.0 3.3.3.0 destination static 1.1.0.0 1.1.0.0 no-proxy-arp route-lookuptranslate_hits = 4267916, untranslate_hits = 4282086Source - Origin: 3.3.3.0/24, Tr...

RJJ36838 · 04-24-2020

Here is the packet trace, I will work on the remote NAT next. Phase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information:MAC Access listPhase: 2Type: ROUTE-LOOKUPSubtype: inputResult: ALLOWConfig:Additional Information:i...

RJJ36838 · 04-24-2020

Here is the NATs pertaining to the AnyConnect. I am not comfortable posting the entire code because there are other sites and a lot of information in there. 1.1.0.0/24 is HQ LAN2.2.2.0/24 is AnyConnect LAN3.3.3.0 is Remote Office LAN 7 (inside) to (a...

RJJ36838 · 04-24-2020

Looks like my email notifications didnt work. I will get this info together, sorry for the late reply.

Member Since	‎04-18-2020 06:38 AM
Date Last Visited	‎04-29-2020 12:13 PM
Posts	5

User Statistics

User Activity

Anyconnect over Site to Site Fails

Re: Anyconnect over Site to Site Fails

Re: Anyconnect over Site to Site Fails

Re: Anyconnect over Site to Site Fails

Re: Anyconnect over Site to Site Fails