Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have seen an issue with an ASA setting up a connection and keeping this connection through a wrong interface.
Background:
ASA is perimeter Firewall, has a default route towards outside and some routes pointing to inside (10.10.0.0) and some to a t...
I am trying to update a 6500 vss with a couple of linecards (no service modules) from 12.2.33.SXI4a to 12.2.33.SXI5 with issu. I loaded the images to both chassis sup-bootdisks.After issu loadversion, the slave reloads with the newer software, but en...
I think i am seeing similar "features" in https://supportforums.cisco.com/discussion/12319041/asa-session-setup-through-wrong-interface-session-stays-there
In my case i had the inside interface "downed" as i rebooted the internal switch.
during tha...
Noticed that 8.2 is affected as well.. have an 5590 which is running latest 8.2.5 (46) which shows the same error.. I am unable to upgrade the box to 8.4 as it is missing RAM slots.. (yes there are none soldered on the mainboard - must be one of the ...
