Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to create a site to site ipsec vpn network using a cisco ftd 3105 as master and cisco 1010 slaves for remote sites.everything works normally when I configure both ends in pre-shared key (I can connect several remote sites).but when I use inter...
I have a site-to-site IPSec VPN network consisting of a central site (asa 5506-x) and 10 remote sites (asa 5506-x).I want to add another site to the same network architecture but this time using a Cisco ASA 1010.The problem is that the tunnel is not ...
I have a VPN network consisting of 10 remote sites (asa 5506-x) and one central site (asa 5506-x) and I want to add the 11th site using asa 1010. The connection is not established and I get warnings at the end of the configuration: see attachment
Our network of 60 remote sites linked to the central office is based on a leased VPN link provided by a telecom operator.The solution is very costly compared with the bandwidth, which is no more than 0.5 Mb in most sites. we'd like to set up our own ...
can you help me please:__i have a cisco asa 5506-x andi want to increase the number of connections anyconnect vpn (the equipement have only 4 connexion) __and what services can be added using the asa5506_sec-pl certificate
for the number of S2S I have 50, I already have a security plus license.I think your 2nd answer seems right, it could be a compatibility problem.but is there a solution to solve this problem
can you help me please:__i have a cisco asa 5506-x andi want to increase the number of connections anyconnect vpn (the equipement have only 4 connexion) __and what services can be added using the asa5506_sec-pl certificate
