I',m not able to access the Nexus 9000 from a different IP segment where the equipment is located.
So I did this:
ip access-list VTY_ACL 10 permit tcp any any
and in the line VTP I added:
line vty session-limit 5 exec-timeout 15 access-class ...
How Can I do to access a Nexus 9000 from different IP segment that currently the device is?
Do I need to create an ACL in the Nexus device to allow that?
I have a nexus 9000 how can I automatically do a backup using the ftp.
This is the ftp:
copy running-config ftp://10.154.5.21/CRRHR-CORE-PRI.txt
But I would to do that automatically
Im trying to connect a Nexus and a 2960 catalyst using a trunk port in both sides. Also the Nexus is connected to a 3750 Catalyst that works as a L3 Switch.
I already configure the ports and everything but I'm not able to access the 2960 catalyst t...
!Command: show running-config!Time: Tue Oct 31 17:08:13 2017
version 7.0(3)I6(1)switchname CRRHR-CORE-PRIvdc CRRHR-CORE-PRI id 1 limit-resource vlan minimum 16 maximum 4094 limit-resource vrf minimum 2 maximum 4096 limit-resource port-channel mini...
show running-config vrf management!Time: Tue Oct 31 17:05:32 2017
version 7.0(3)I6(1)
interface mgmt0 vrf member managementvrf context management ip route 0.0.0.0/0 10.154.5.1
IP Route Table for VRF "management"'*' denotes best ucast next-hop'...