Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,i am first time using the new ASA IOS ( 8.4) and frankly i am in troubleI have one PPPOE interface ( Ip assigned from DHCP) i want to use PAT on that interface and divert FTP traffic to the host inside Can any one please help me in resolving t...
Hi all,I have a cisco 2811 with security bundle with IOS 12.4(13r)TI am planing to use this router as a VPN gateway for company ( i.e)1. LAN 2 LAN VPN ( Supporting if remote site is having dynamic IP)2. Remote access VPN for VPN clientI have configur...
Hi gurus,I am having trouble with routing in PIX501I have one Pix 501 and one Cisco routerCisco Router is configured for IPSEC VPN ( LAN interface 172.19.194.1) and PIX is configured for access the internet.Default gateway of Pcs in LAN are PIX insi...
Hi all,I am having issue while sending mails( with attachments only) to yahoo.com through Domino smtp server and i am getting below error messagesConnection broken after an error sending DATA commandAttempting to Disconnect:Connection already disconn...
Hi all,We are going to purchase a Device , thte sites and also VPN server for remote access ( EzVPN)So could you guys give me suggestions, Should we use ASA or should we use Cisco 1800 series router with security software.The main purpose of this dev...
I tried clear xlateand tried to ftp from outside still same error i cant ftp from outsidebelow is the sh run nat outputnat (inside,DMZ) source static any anynat (DMZ,outside) source dynamic any interface!object network obj_any nat (any,outside) dynam...
ok i remove that statment below is the packet trace outputPhase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information:MAC Access listPhase: 2Type: ROUTE-LOOKUPSubtype: inputResult: ALLOWConfig:Additional Information:in ...
Ok understoodif i remove nat (inside,outside) source dynamic any interfacewould it stop all the hosts "inside" to use internet using PAT ( on outside interface) ??I understand that for data Ftp use different port but we cannot have one to one nat a...
Not nate'd .... Why my Nat statment is wrong ?? if wrong what is the correct one ?I am using ftp connection from outside and using the filezila ftp server and xp ftp client from outside for connectionbelow is the CLI packet tracer infopacket in out...
