Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,On advice of our supplier I've bought an Cisco Aironet 1310G, purpose was to connect 3 sheds who are about 100 meter apart from each other to the internet, a default ADSL router. It is connected with an Aironet Power injector LR2. The range of ...
Hello,following issue: cisco epc3925 in transparent bridge provided by isp with following wan details ip=x.x.x.120 subnet=255.255.255.248 gw=x.x.x.121 and 2 dns server ip'sI can't get the one-to-one nat working. anyone able to give me some pointers i...
Hello Robert,that is also the way i set it up. but then it dawned on me when you mentioned to check the public ip on the server which is nat-to-nat enabled. ipchicken.com as im from the netherlands i use myip.nl for checking. never the less for that...
Hello Robert,Correct, three servers, I want to nat to from a block of public ip'sfor example public address x.x.x.123 <> lan address 172.x.x.15 services https and httppublic address x.x.x.124 <> lan address 172.x.x.10 service rdp public address x....
