Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning my question is simple. And more probably you have already answer to... In WLC 5508 configuration menu it is possible configuring roaming globally for all clients. But I ask, this configuration is dominant on what defined on Workgroup bri...
Good morning! About this topic I would like to have some clarifications: in a wireless controller the default is WMM for the AP managed. So what does it mean that? Could APs use a minimum and a maxim time wait of transmission? As explained in the li...
Hi guys,what about this topic? How can I limit the buffering on APs? Reducing packet retry value? Packet retry timeout? RTS retries? What else?I thanks in advance for any suggestionA
Good morning to all!We have a CiscoWorks LMS 2.6 installation that manage a WAN network architecture (hub-and-spoke architecture). My question is sample: all links are 2 Mbps links and topology map represent these in correct way. In one case topology...
Good morning! I write again about the WMIC 3205 used on MAR3200 wireless router: so I hope that there is a Cisco wireless expert able to help me. First question: I know that the 802.11a frequencies supported by 1240AG Access Points are: 2,412 to 2,47...
Hi George, thanks for the answer. Let me ask another thing: if I have only a traffic source, time sensitive, can I use EDCA to best the performance? If I have understood well EDCA permits to access to the medium more quickly, is right?And finally, ap...
Sorry Scott, I have tried to explain the problem but too speedly...losing details for example of the application and the existing wireless infrastructure. I agree with what you said about wifi, interference,etc....goods indications.Let me add that I'...
George...in effect I have already seen the configuration note for this option....in the wgb realized by 1242AP usage, rts retries is set equal to 8, so lower enough. I' m asking if there is something to tune on the WLC (WiSM cards on 6500 Catalyst)...
Mark, I don't know if i have explained well my problem. I know how I have to configure the access points and the WMIC on the MARs. The problem is that Cisco dosn't want to sell th 3205 WMIC because it isn't compliant (i think, really, the IOS version...
