Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We moved the outside interface on an ASA5510 from a10/100 port to a 10/100/1000 port. The nameif and IP address from the old port were removed and added to the new port same security level. All the config that reference the nameif were added back...
How do we protect our internal network from a virius that might be on a home computer? We are looking at using the Cisco 800 series VPN router for our at home DSL users. Our 2 biggest concerns are that the home user might have a virus and once connec...
Is there away to block streaming audio/video using a pix 525? Or can you limit the amount of bandwidth that they can use from the T1 so that not all the bandwidth is used?
Is there a way to filter streaming video/audio or at least limit the amount of band width used by such programs? We have an internet T1 coming through a 2610 router then to a Pix 525. We want to be able to control the streaming sites. Some of these s...
We did clear the ARP tables. I think we saved a copy of the new config and I'll post it. We did run a comparison of the changes we did to the original config and didn't see anything we missed.
Thanks for the information. What VPN solution are you using? We are looking at the Cisco hardware products because we are tring to avoid any software on a home PC. We feel that it will be less hassle if the home user has a problem and has the neighbo...
Having 2 or more T1's connected to the same routers over a WAN link. This will give you a 3meg pipe between the sites. It will also allow you to keep working if one of the T1's fail but with half the bandwidth.
