Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Bear with me as I am a beginner and might not be using correct terminology. I have a new issue as of this week where I cannot communicate with another subnet from 1 of my 10 workstations. Basically we have 2 networks, A (10.13.153) and B(10.13.154) c...
I have a vendor that installed 2 new 3750X switches in an existing stack of 2 3750G switches. The stack as never worked due to a version mismatch. I have been trying for days to get this stack to work but have been unsuccessful. Currently versions...
So it's working again but I didn't really do anything. I changed the IP to .59 for some testing and left it there for a day. When I put it back to .54 it is now working all of the sudden. Any ideas
You are correct. There is a 2nd router but it is identical. Every switch and router in the network is redundant and there are 2 nic cards on every station. This is a process network in an industrical facility. The network is set up in what Honeyw...
Assigned IP: 10.13.153.54Netmask: 255.255.255.0DG: 10.13.153.254 Switch Interface:interface GigabitEthernet1/0/2 description TO COBRBBSW1Y no switchport ip address 10.13.153.252 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip p...
I got it to work with 12.2(55)SE5.tar. I am very new to this and had been using the .bin. Didn't think I needed the .tar to install with CLI. Anyways, now I have SDM mismatch. I'm going to change the 12S switches to desktop SDM template next week...
