Folks, I have a tiny site connected using fiber across the street from my datacenter/campus where dnac is installed and working.I know Cisco Best practices says to have a controller at every remote site for fabric enabled wireless. My questi...
Folks, I have a tiny site connected using fiber across the street from my datacenter/campus where dnac is installed and working.I know Cisco Best practices says to have a controller at every remote site for fabric enabled wireless. My questi...
Folks, We have deployed the latest Cisco APs and controller in an office with high density deployment. What we are seeing that the power level of all the APs is set to 8. 2.4 Ghz band seems to work fine but the 5Ghz band is very slow (Le...
Thank you for the response. I forgot to mention that the Fabric enabled controller at the central site is already being used for central site APs. This tiny office across the street which comprises of a very few workers would need 1 or 2 APs. Can't i...
I have included the site survey report that was taken when the problem was occuring. 2.4 Ghz is perfectly fine, 5 Ghz is super slow almost to a point that it is unusable. Cisco 3802 APs . Standard office space on one of the floors of a building. The ...
The survey was done correctly by a professional company. My question is what needs to be done at the controller level to inform that this is a high density deployment and what tuning needs to be done to RRM. 5 Ghz performance is terrible .