About JPark-SL

JPark-SL · 07-28-2020

I've got 3 new switches, and i'm trying to go through setup instructions. So far, the instructions attach a laptop (where it gets a DHCP IP and then access the web GUI at 10.0.0.1 or 10.0.0.3 Isn't working at well (PC never gets the DHCP address) I'v...

JPark-SL · 07-30-2020

Ok, I took a risk, and it paid off. I found that the flash:config.text file looked like it was the startup-config. so, I made a backup of that file, and deleted it. then booted the switch. It thankfully, ran through a initial setup config, via the co...

JPark-SL · 07-30-2020

Here's the options when I run set switch: set--=sleep -- Pause (sleep) for a specified number of?=BAUD=9600BOOT=flash:/c1000-universalk9-mz.152-7.E1/c1000-universalk9-mz.152-7.E1.binCLEI_CODE_NUMBER=CMM5M00ARADAUGHTERBOARD_ASSEMBLY_NUM=DAUGHTERBOARD_...

JPark-SL · 07-29-2020

Richard, I did catch it at boot, but can't figure out how to set a password. The link you sent only had a single sentence for password recovery:"By default, any end user with physical access to the switch can recover from a lost password by interrupt...

JPark-SL · 07-28-2020

marce1000, I mentioned in my original post I tried cisco/cisco. Didn't work. I'm using the console cable, and after the switch boots, it's just asking for username and password, over and over. I never get a prompt.Any other default credentials it cou...

JPark-SL · 07-28-2020

Thank you Richard for the link. I reviewed all of it, but it seems like it assume you can get a prompt. I'm unable to get a console terminal prompt. With the console cable attached, after startup, it immediately just asks for Username and Password, a...

Member Since	‎07-28-2020 08:53 AM
Date Last Visited	‎08-28-2020 12:08 AM
Posts	6
Total Helpful Votes Received	10

User Statistics

User Activity

After Catalyst 1000 write erase, can't login now, what's the password now?

Re: After Catalyst 1000 write erase, can't login now, what's the password now?

Re: After Catalyst 1000 write erase, can't login now, what's the password now?

Re: After Catalyst 1000 write erase, can't login now, what's the password now?

Re: After Catalyst 1000 write erase, can't login now, what's the password now?

Re: After Catalyst 1000 write erase, can't login now, what's the password now?