Hi Rob, is that with or without the crypto map Outside_map 3 set connection-type originate-only in p...

Hi Rob, did that, as soon as I remove it the tunnel (closed) is dropped, added it back in, tunnel st...

Hello, again Rob,I can send you a full config with the real IPs and password sanitized if that helps...

Hi, we had and Issue last Week that Rob Ingram helped with however that went wrong about two days la...

Hi Rob, let's start off with, Thank you very much for your help on this and yep you called it it was...

UPDATE: the data is now being encapsulated, after a reboot of the ASA, I assume that means that the ...

Hi Rob,here is the config, any questions let me know.EDIT: I also forgot to say that the working VPN...

Hi Rob, is this what you are looking for?for context the sanitized addresses1.1.1.2 gateway of the o...

So pining from the DC ion VLAN16 (172.16.0.10/21) to 172.19.171.1, with about 1 min apart, no change...

Hi Rob do you mean the Counters on the ASA or the Smoothwall, if Smoothwall, ill have to respond aft...

ok so it's not that :(, the only thing I don't have access to is the Meraki router supplied by the I...

Ok just tried from the internal DC (172.16.010) to a Printer on the remote site 172.19.171.240), but...

How are you testing?Ping from the inside interface of the ASA to the inside interface of the Smoothw...

Hi Rob,thanks for responding I have attached the output of the requested commands.Simon

Hi, can anyone help, we have a site to site VPN setup between a Cisco ASA 5510 and a Smoothwall S14,...