About tboucheau

tboucheau · 07-05-2011

Hi,I'm having trouble with 2811 routers hosting 7 BRI (4 on the first and 3 on the second). When I reach 4 simultaneous calls, the voice quality is very poor : delay, distortion...I though of DSP issue but I'm not sure of what is configured... My pro...

tboucheau · 07-06-2011

Ok i'll check the modem complexity and will go back to my ISP. Thanks for this answer.Regards

tboucheau · 07-06-2011

So it's a NM-HD-2V with 2 VIC2-2BRI-NT/TE on each router. One with 3 BRI connected and one with 4 BRI connected.I only want to be sure that should allow me to have 4 simultaneous calls before coming back to my ISP. Thanks for your advices.

tboucheau · 07-06-2011

Really ? There should be PVDm modules in my configuration ?What a disaster...Thanks for the answer...

tboucheau · 07-06-2011

There's no pvdm module installed. The only DSPs availlable are those built-in on the network module (i don't know the hardware exactly as my provider is not fully transparent.)Should I have pvdm modules to make 4 simultaneous calls on BRI ?Sent from ...

tboucheau · 07-05-2011

No it's definitly not in QoS as we already have installes several sites. It's the only site with 7 BRI with no additionnal PVDm modules. I'm thinking of an hardware limitation as it appears only on the 4th call done simultaneously.Sent from Cisco Tec...

Member Since	‎07-05-2011 02:12 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	14

User Statistics

User Activity

Issue on two 2811 routers with 7 BRI for CUCM

Issue on two 2811 routers with 7 BRI for CUCM

Issue on two 2811 routers with 7 BRI for CUCM

Issue on two 2811 routers with 7 BRI for CUCM

Re: Issue on two 2811 routers with 7 BRI for CUCM

Re: Issue on two 2811 routers with 7 BRI for CUCM