About Smitster

Smitster · 02-22-2022

Hi, I wonder if you can help me. I currently have two sites, Site A and Site B that both sit behind a Meraki and a Cisco FPR1120 Firewall. The Meraki establishes a site to site vpn tunnel between the two. Site A details: inside network 192.168.1.0/24...

Smitster · 11-19-2020

Hi, I currently have two offices/networks connected to one another via Cisco Meraki Site to Site VPN. Office A has network address 192.168.1.0/24 and Office B has network address 192.168.2.0/24. Office B also has a Cisco FPR1120 firewall managed thro...

Smitster · 09-10-2020

Hi all,Running a FPR1120 Firepower FDM and have set up a remote access vpn tunnel with Cisco AnyConnect. Tunnel connects fine and I can access internal resources but no external internet. Need to maintain a full tunnel (no split tunnelling) and belie...

Smitster · 09-07-2020

Hi all, I currently have a setup as follows: ISP - Edgerouter Lite - Cisco FPR1120 - Internal Network I have set up a test network for testing the Remote Access VPN setup using Anyconnect Plus. Edgerouter Lite has an ip of 192.168.1.1, outside interf...

Smitster · 02-22-2022

Have updated the NAT rule to the following: but no luck. Re interesting traffic we're using the Meraki AutoVPN technology and there is a static route specified, not sure if there's additional specific setting we need to look at adding? Thanks,

Smitster · 02-22-2022

I've updated the NAT rule to the following on Site B FPR: but still no dice unfortunately

Smitster · 02-16-2021

Hi, Following up on the above thread as I still haven’t managed to get web filters working on the remote access vpn pool. I have an ACP block rule that currently has source as inside, network vpnpool, destination outside with a list of url categories...

Smitster · 09-14-2020

So I’ve added a ACP as follows: Name RAVPNFilter, Action Block, Source Zone Outside Zone, Network VPNPool, Destination Zone OutsideZone, then a list of applications/url categories for blocking. Couldnt get this to work though. I’ve tried changing sou...

Smitster · 09-12-2020

DTLS was disabled, enabling it solved it, thank you. Last one from me, is there a way for the URL filtering policies to be applied to the Remote Access VPN users? Thanks,

Member Since	‎09-07-2020 05:26 AM
Date Last Visited	‎03-07-2022 11:29 AM
Posts	13

User Statistics

User Activity

Cisco Anyconnect and 2 x Firepower NGFW's

Allow remote network through firewall

Full tunnel with Cisco Anyconnect and Firepower

VPN Web Portal on FPR1120

Re: Cisco Anyconnect and 2 x Firepower NGFW's

Re: Cisco Anyconnect and 2 x Firepower NGFW's

Re: Full tunnel with Cisco Anyconnect and Firepower

Re: Full tunnel with Cisco Anyconnect and Firepower

Re: Full tunnel with Cisco Anyconnect and Firepower