Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I configured the interfaces individually at L3 and could ping across each linkExample:4500 Switch 2: 6500 Switch 1int t5/1 - int g3/17 1 Gig fiber linktore down configtried second set of interface...
I have a 3650 switch connecting to the 2504.
The 3650 configuration looks similar to:
vlan 5
name WLC-MGMT
vlan 10
name Guest
vlan 15
name Corporate
int po1
switchport trunk allowed vlan 5.10,15 switchport mode trunk load-interval 30
no shut
int Gig...
When your logged into the wireless controller looking at the "Advanced View", Select "Controller" from the top menu. Then select "Interfaces: from the left hand menu.
Did you configure the VLAN interfaces there for both SSID's?
When I deploy a wirel...
TCP windowing is a congestion avoidance mechanism that facilitates allows the receiving system to reduce its window size such that the NIC buffers and or OS buffers are not overrun. The default TCP windows is 65535 bytes and for it to be different a...
Although best practice is to perform a wireless survey to find the noise floor and interference within a building. If you need to estimate at a high level the number of access points for generic coverage take a look at:
http://baud9600.com/Calculato...
