Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a customer that would like 4 digit ext dialing between their site with Cisco IPT and their main site with Avaya PBX. The main issue is that their Cisco IPT subnet does not have and cannot have visibiliity to the router at the Avaya site. Questio...
I have a newly installed 5.1 server that I have a non-gatekeeper intercluster trunk setup to a 4.2 server on. Calls flow perfectly from a 5.1 registered phone to a 4.2 extention but all I recieve is a fast busy when a 4.2 ext calls a 5.1. Advice?
We have a remote site that is accessing our CCM's over a T1 and they seem to be having alot of problems with their Console's not reporting the correct line status and/or displaying ? for half the users. Its our understanding this is a multicast funct...
Brandon,Thanks for the help. On the HQ router I am a bit confused on why i need an inbound voip peer. Shouldn't the pots peer match and force the call out the voice port? In the inbound voip peer what will be the target?
The following is the CCM-SDI trace from the 5.1:TimeStamp: 02/16/2007 18:04:56.022Trace Name: CCMMessage: DeviceTransientConnection - Transient connection attempt. Connecting Port:5060 Device name [Optional].: Device IP address.:192.168.105.3 Protoco...
It does make sense. So there is no way to integrate console attendant into a Hunt Pilot configuration? Another words the Hunt Pilot, Hunt List and Line Groups do offer me the abilility to utilize primary extentions but the console attandent has no co...
