About kyleking

kyleking · 10-25-2006

Scenario: I have 2 PIXes (PIX1 and PIX2) at remote sites each connected with a site-to-site VPN to the central ASA (ASA1). I can ping to and from the ASA1 from either site but I can't ping from one remote site to the other remote site (PIX1 to PIX2)....

kyleking · 10-26-2006

the link above was cutoff, see below:http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtmlin the example above, do you have to use a dynamic L2L? or can you use Static L2Ls for both tunnels?

kyleking · 07-03-2006

Is it possible for a non-cisco vpn client to connect thru a PIX 501? I have the same issue but with Watchguard's MUVPN (Mobile User VPN). Could this be fixed by a simple access-list?Any help with this would be great!Thanks

Member Since	‎07-03-2006 09:04 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	3

User Statistics

User Activity

Trouble with enhanced Spoke-to-Spoke VPN configuration

Re: Trouble with enhanced Spoke-to-Spoke VPN configuration

Re: Cisco VPN client can't connect from behind PIX