Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am facing a problem allowing SSH access from Internet to a VPN device located behind Cisco 3745 router. 3745 is configured with Firewall/IDS feature set.I added following access list to enable SSH Access-list 101 permit tcp any host 122.100.10.1 e...
I have PIX 515 with 3 NIC named ( inside, outside, dmz)I have 2 Servers ( Exchange and Windows 2000 with SMTP) in the DMZ. I currently have a static command pointing the mail doamin IP address to exchange Server in the DMZ.I wanted to do PAT on the I...
I did an upgrade from PIX 5.2.3 to 6.1.4 and when rebooted ethernet2 interface was not recognised. Show Interface does not list the ethernet2 (DMZ)interface.I put back the 5.2.3 and show interface displays the ehternet2 interface and everything is fi...
I am trying to establish a VPN tunnel between the Central office having VPN controller 3005 and branch office having Cisco 827 Router.There is a Perimeter Router with access-list configured in front of the 3005.I have the following acl statement on t...
I do not require SSH enabled on the 3745 router.I want to access a VPN device using SSH through 3745 router. SSH is possible when Firewall/ IDS configuration is removed. When Firewall/IDS configuration added, SSH to inside VPN device is not possible....
Please find the PIX configuration.IP addresses are fake public IPs.Thanks.----------------------------------------------------------------------------------------------------------PIX Version 6.1(3)100nameif ethernet0 outside security0nameif ethernet...
Sorry for the previous reply.I did the upgrade again and still I have the ethernet2 (DMZ) interface missing.I can see the message "Ignoring PCI card in slot:2Thanks
