About gmayers

gmayers · 11-28-2007

Hi,Wasn't too sure where to post this, but I guess it is a WAN/Routing question so hopefully this forum is ok.I would like someone to explain the configuration concepts of the following scenario if possible...I currently have an 1841 router with load...

gmayers · 08-29-2007

I have just installed a Xerox 8560 MFP printer and as I am running 6 different vlans I don't seem to be able to get the scan to PC function working.If a pc is on the same vlan as the scanner, it works no problem. If I try to scan to a pc on another v...

gmayers · 11-29-2007

Hi Jorge,I have attached the diagram of how I envisaged it to be. Hopefully this will make sense.The ADSL lines terminate directly on the 1841, so only one ethernet port is used and is basically the outside interface.Regards,Graham

gmayers · 11-29-2007

Hi Jorge, thanks for responding.My first thought was to put the 1841 in front of the ASA as the DSL lines terminate on that device. I agree with you that the ASA should handle all the security duties.So then, if the ASA is behind the 1841, surely the...

gmayers · 08-29-2007

Thanks for the reply Dharmesh, but I just wanted to check that you understood the question?I do not need to enable DHCP over the VLANs and I also do not need to enable SNMP on the switch to monitor it.I somehow need to route SNMP and SMB protocols ov...

Member Since	‎10-30-2002 04:19 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5

User Statistics

User Activity

ISP->Router->ASA Conceptual Questions

Xerox Scan to PC over VLANs

Re: ISP->Router->ASA Conceptual Questions

Re: ISP->Router->ASA Conceptual Questions

Re: Xerox Scan to PC over VLANs