Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone, I have connected three AP803 with a WLC3504.The AP mode is FlexConnect.I want to broadcast a Guest SSID over these APs.This works so far.In the WLAN settings I have activated "FlexConnect Local Switching" so that I can use the VLAN 30...
Hello everyone,i have a small problem with an IR829M and the AP803 it contains.The setup looks like this:WLC 5520 Management (172.16.0.10 SFP Port 1 / 1G) --- (172.16.0.1 GE0/0/1) ISR 4400 Series Router (192.168.2.251 GE0/0/0) --- (192.168.2.249 GE0)...
Would that affect the roaming experience of the user in any way?I got it to work yesterday. So the DHCP Discover was forwarded to the WLC but i was seeing the Plain DHCP Frame in my trace and not CAPWAP traffic (which it should be (?) because i thoug...
i found out that there is no trustpoint on the 5520 for my APs while debugging*Oct 30 13:27:45.003: CRYPTO_PKI: (6000F) Adding peer certificate
*Oct 30 13:27:45.003: CRYPTO_PKI: ip-ext-val: IP extension validation not required
*Oct 30 13:27:45.003: C...
today i compared the certificates on both WLCs (show certificate all) i found out that the 3504 had one certificate more installed (na server ca cert) Certificate Name: NA server CA cert
Subject Name :
C=PL, ST=mazowieckie, L=Warsaw, ...
