Hello,Does anyone has recommandations regarding phase1/2 timers for ipsec tunnels via a gprs/umts connection?Is normal ipsec preferable (udp) or tcp?Thx!
If I have communication that is initiated from a vlan that has normal 1500 mtu to a vlan on which all devices have mtu 6144, will the router (in our case a 3750 or 6509) chop up the reply packet from the destinatino (in the jumbo frame vlan)?
Is it (or will it be) possible to edit the http(s) network authentication pages that you get on via a redirect on an ASA 55xx platform.For instance put in the company logo or put a disclaimer on the page?
I have the following problem:I have a remote asa and a central asa.The remote asa has its inside interface in the 172.27.2.0/24 range.The external interface uses DHCP.The tunnel is coming up normaly when I use static ip's behind the internal interfac...
When I add the ipaddress of the external interface to the acl on both sides, the dhcp requests are sent over the tunnel BUT with as source address the external ip of the remote asa.But since the external interface uses DHCP this is not workable.Is it...
The relay is already enabled on the inside interface:dhcprelay server 172.22.22.2 outsidedhcprelay enable insideI added the inside ip to the acl:access-list outside_1_cryptomap line 1 extended permit ip interface inside anyaccess-list outside_1_crypt...
