Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiIf i have two switches connected by two parallel links then on the non root switch one port will be root port and the other port will be blocked. So what happens if the blocked port stops receiving bpdus from the root. Will there be any change in t...
hi allif a network is running both rip and eigrp , if on eigrp "auto summarisation is there" . if router on that network get 2 routes from both rip and eigrp "ripgot = 150.24.5.0 " and eigrp get = 150.24.5.0 " case : 1 if rip was configured its admin...
hi rickthanks for your replyin case 3 if both rip and eigrp has admin distance 90 and if rip advirtizes 150.24.0.0/16 and eigrp adverstizes 150.24.5.0/24 then which one will be taken. will both router appear in the routing table?
HiThanx for your reply. I have a switch which is in this mode (shown below). Previously its working fine but today when i tried to access the switch using telnet, i found it to be in rommon modeCCPress RETURN to get started!rommon 14 >rommon 14 >rom...
