About NoelAdams7444

NoelAdams7444 · 11-03-2020

Hi guys, Not too sure if I have posted on the correct but I have 3 switch stacks, 1 on each floor which are connected via Layer 3 Ether Channels. I have created a VLAN 240 for our guest Wi-Fi which I have extended on all switch stacks via Access port...

NoelAdams7444 · 11-05-2020

I have attached the interface status of the port connecting 1st to 3rd Stack. The attachments highlights the connected ports. I have also attached interface trunk for those stacks. Bear in mind these switches are currently connected as access ports. ...

NoelAdams7444 · 11-05-2020

Does anyone have any ideas? I would really appreciate it. I have put together a STP topology of Vlan 240 and to also illustrate the connections between the switches. At this stage I'd like to know if this could possibly be causing an issue with being...

NoelAdams7444 · 11-04-2020

Hi all, I was having a look at the STP summary and was wondering if the current setup could possibly be causing the issue. As per the attached screen shots. 3rd Stack is the root bridge2nd Stack has the root port1st Stack also states it is the root b...

NoelAdams7444 · 11-03-2020

Hi, I have checked the 240 Vlan on 1st stack and it appears to be active. The correct port Gi3/0/31 which is linking to the 3rd stack is assigned to that 240 Vlan. I have checked STP on all the switches for Vlan 240. The 2nd stack link port is the ro...

Member Since	‎11-03-2020 01:49 AM
Date Last Visited	‎11-09-2020 12:37 PM
Posts	5
Total Helpful Votes Received	10

User Statistics

User Activity

Unable to Statically or Automatically Assign IP for a VLAN

Re: Unable to Statically or Automatically Assign IP for a VLAN

Re: Unable to Statically or Automatically Assign IP for a VLAN

Re: Unable to Statically or Automatically Assign IP for a VLAN

Re: Unable to Statically or Automatically Assign IP for a VLAN